Light Duty Manual Chain Hoist with Fully Forged Hooks (CH-J TYPE)
Characteristics
1. Automatic double pawl braking syatem.
2. Double cover protection.
3. Light weight robust construction.
4. Low effort to lift maximum load.
5. Extra thick asbestos free friction discs.
6. Fully forged hooks are fitted with safety latches as standard.
7. High grade alloy load chain.
8. Zinc plate hnd chain as standard.
9. Each hoist is proof tested at 1.5 times of WLL up to 10t. 1.25 times of WLL 20t-50t.
10. Complies with EC Council Directive 2006/42/EC Machinery. ASME B30.16, AS 1418.2.
Remarks: Hoists with the lift in other lengths are also available.
Cautions
-Do not exceed Working Load Limit.
-Keep the load chain lubricated at all times.
-Before operating, inspect the load chain for damages.
-Before operating, inspect the top and bottom hooks for signs of deformations and check that the safety latches are attached.
Frequently Asked Questions
Before using it for the first time - unless the equipment has an EC Declaration of Conformity which is less than one year old and the lifting equipment was not assembled on site. If it was assembled on site, it must be examined by a competent person to confirm that the assembly was correct and safe.
After assembly, and before use at each location - for all lifting equipment that requires assembly or installation before use (eg tower crane) - to ensure it has been installed correctly and is safe for use.
Characteristics
1. Automatic double pawl braking syatem.
2. Double cover protection.
3. Light weight robust construction.
4. Low effort to lift maximum load.
5. Extra thick asbestos free friction discs.
| Model | CHJ005 | CHJ010 | CHJ015 | CHJ020 | CHJ030 | CHJ050 | CHJ100 | |
| Capacit t | 0.5 | 1 | 1.5 | 2 | 3 | 5 | 10 | |
| Standard Lift m | 3 | 3 | 3 | 3 | 3 | 3 | 3 | |
| Proof Load kN | 7.35 | 14.7 | 22.1 | 29.4 | 44.1 | 73.5 | 147 | |
| Effort Required to Lift Rated Load N | 260 | 269 | 375 | 407 | 386 | 402 | 426 | |
| No. of Falls of Load Chain | 1 | 2 | 4 | |||||
| Load Chain mm | 5×15 | 6×18 | 8×24 | 10×30 | ||||
| Dimensions(MM) | A | 129 | 156 | 172 | 184 | 236 | 261 | 364 |
| B | 124 | 135 | 150 | 156 | 156 | 181 | 181 | |
| C | 281 | 307 | 369 | 446 | 521 | 521 | 701 | |
| D | 31.5 | 40.5 | 41.5 | 47 | 51 | 60.5 | 85.5 | |
| K | 35.5 | 31 | 33 | 36.5 | 43.5 | 51.5 | 63.5 | |
| Net Weight kg | 7.2 | 11 | 16.5 | 16.7 | 24.7 | 37 | 99 | |
| Extra Weight per Metre of Extra Lift kg | 1.5 | 1.8 | 2.3 | 2.3 | 3.8 | 5.4 | 9.8 | |
6. Fully forged hooks are fitted with safety latches as standard.
7. High grade alloy load chain.
8. Zinc plate hnd chain as standard.
9. Each hoist is proof tested at 1.5 times of WLL up to 10t. 1.25 times of WLL 20t-50t.
10. Complies with EC Council Directive 2006/42/EC Machinery. ASME B30.16, AS 1418.2.
Remarks: Hoists with the lift in other lengths are also available.
Cautions
-Do not exceed Working Load Limit.
-Keep the load chain lubricated at all times.
-Before operating, inspect the load chain for damages.
-Before operating, inspect the top and bottom hooks for signs of deformations and check that the safety latches are attached.
Frequently Asked Questions
Q1. How often should lifting equipments be subject to thorough examantions?
Thorough examination of lifting equipment must take place every 12 months - or every 6 months if the equipment is used to lift people. Any accessories used in lifting should also be inspected every 6 months. These are the minimum requirements, where there is no formal 'examination scheme' drawn up by a competent person.Q2. What is a competent person ?
A competent person is someone who has appropriate practical and theoretical knowledge and experience of the equipment for which they act as 'competent person'. This knowledge and experience can help them detect defects / weaknesses and assess whether they will affect the continued safe use of the equipment.Q3. Does new lifting equipment have to be thoroughly examined before use ?
You must have lifting equipment examined in the following circumstances:Before using it for the first time - unless the equipment has an EC Declaration of Conformity which is less than one year old and the lifting equipment was not assembled on site. If it was assembled on site, it must be examined by a competent person to confirm that the assembly was correct and safe.
After assembly, and before use at each location - for all lifting equipment that requires assembly or installation before use (eg tower crane) - to ensure it has been installed correctly and is safe for use.